Version 3 (modified by 7 years ago) ( diff ) | ,
---|
Trac Ticket Queries
Table of Contents
In addition to reports, Trac provides support for custom ticket queries, which can be used to display tickets that meet specified criteria.
To configure and execute a custom query, switch to the View Tickets module from the navigation bar, and select the Custom Query link.
Filters
When you first go to the query page, the default filter will display tickets relevant to you:
- If logged in then all open tickets, it will display open tickets assigned to you.
- If not logged in but you have specified a name or email address in the preferences, then it will display all open tickets where your email (or name if email not defined) is in the CC list.
- If not logged in and no name/email is defined in the preferences, then all open issues are displayed.
Current filters can be removed by clicking the button to the left with the minus sign on the label. New filters are added from the dropdown lists at the bottom corners of the filters box; 'And' conditions on the left, 'Or' conditions on the right. Filters with either a text box or a dropdown menu of options can be added multiple times to perform an Or on the criteria.
You can use the fields just below the filters box to group the results based on a field, or display the full description for each ticket.
After you have edited your filters, click the Update button to refresh your results.
Navigating Tickets
Clicking on one of the query results will take you to that ticket. You can navigate through the results by clicking the Next Ticket or Previous Ticket links just below the main menu bar, or click the Back to Query link to return to the query page.
You can safely edit any of the tickets and continue to navigate through the results using the Next/Previous/Back to Query links after saving your results. When you return to the query any tickets which were edited will be displayed with italicized text. If one of the tickets was edited such that it no longer matches the query criteria , the text will also be greyed. Lastly, if a new ticket matching the query criteria has been created, it will be shown in bold.
The query results can be refreshed and cleared of these status indicators by clicking the Update button again.
Saving Queries
Trac allows you to save the query as a named query accessible from the reports module. To save a query ensure that you have Updated the view and then click the Save query button displayed beneath the results. You can also save references to queries in Wiki content, as described below.
Note: one way to easily build queries like the ones below, you can build and test the queries in the Custom report module and when ready - click Save query. This will build the query string for you. All you need to do is remove the extra line breaks.
Note: you must have the REPORT_CREATE permission in order to save queries to the list of default reports. The Save query button will only appear if you are logged in as a user that has been granted this permission. If your account does not have permission to create reports, you can still use the methods below to save a query.
Using TracLinks
You may want to save some queries so that you can come back to them later. You can do this by making a link to the query from any Wiki page.
[query:status=new|assigned|reopened&version=1.0 Active tickets against 1.0]
Which is displayed as:
This uses a very simple query language to specify the criteria, see Query Language.
Alternatively, you can copy the query string of a query and paste that into the Wiki link, including the leading ?
character:
[query:?status=new&status=assigned&status=reopened&group=owner Assigned tickets by owner]
Which is displayed as:
Customizing the table format
You can also customize the columns displayed in the table format (format=table) by using col=<field>. You can specify multiple fields and what order they are displayed in by placing pipes (|
) between the columns:
[[TicketQuery(max=3,status=closed,order=id,desc=1,format=table,col=resolution|summary|owner|reporter)]]
This is displayed as:
Results (1 - 3 of 5)
Ticket | Resolution | Summary | Owner | Reporter |
---|---|---|---|---|
#6 | fixed | Very IMPORTANT: Added new 4DVAR operator for HF radials | ||
#5 | fixed | typo in ad_zetabc.F | ||
#4 | fixed | '#' is missing in tl_wrt_ini.F |
Full rows
In table format you can also have full rows by using rows=<field>:
[[TicketQuery(max=3,status=closed,order=id,desc=1,format=table,col=resolution|summary|owner|reporter,rows=description)]]
This is displayed as:
Results (1 - 3 of 5)
Ticket | Resolution | Summary | Owner | Reporter |
---|---|---|---|---|
#6 | fixed | Very IMPORTANT: Added new 4DVAR operator for HF radials | ||
Description |
This update is not public and the only users having access to our omlab svn repository may use it. This is an ongoing funded research. This is my private research svn branch and very few have access to it. The 4DVar data assimilation data operators were updated to allow extra-observations type classes with multiple correspondences with the model state variables. Previously, the observation operator in obs_write.F (NLM, TLM, RPM), ad_misfit.F (ADM, primal formulation), and ad_htobs.F (ADM, dual formulation) have one-to-one correspondence with each state variable (zeta, u, v, T, S, and other passive tracers). Recall that the observation operator spatially interpolates the model at the observation locations at the appropiate time. Examples of extra-observation classes include HF radials, travel time, pressure, etc. This updade includes the observation operator to process HF radar surface velocity meassurements (radials) that affect both u- and v-momentum state variables.
Many thanks to Brain Powell for his help in the coding and testing of the HF Radar operator to assimilate surface velocity radials. Corrected a bug in ad_misfit.F and obs_write.F in the managing of the screening and quality control variable obs_scale for the primal formulation. The issue is that in the primal formulation (IS4DVAR), the current time window (or survey) observations are loaded to the working arrays using local indices (array elements 1:Nobs) as opposed to global indices in the dual formulation (W4DPSAS and W4DVAR). Recall that the screening variable ObsScale is computed only once to facilitate Background Quality Control on the first pass of the NLM (WrtObsScale=T and wrtNLmod=T). Therefore, we need to load and save values into global array ObsScaleGlobal so it can be used correctly by the TLM, RPM, and ADM. # ifndef WEAK_CONSTRAINT ! !----------------------------------------------------------------------- ! Save observation reject/accept flag in GLOBAL screening variable. !----------------------------------------------------------------------- ! IF (wrtObsScale(ng).and.wrtNLmod(ng)) THEN ic=0 DO iobs=NstrObs(ng),NendObs(ng) ic=ic+1 ObsScaleGlobal(iobs)=ObsScale(ic) END DO ELSE ic=0 DO iobs=NstrObs(ng),NendObs(ng) ic=ic+1 ObsScale(ic)=ObsScaleGlobal(iobs) END DO END IF # endif
|
|||
#5 | fixed | typo in ad_zetabc.F | ||
Description |
in ad_zetabc.F, line 99: ad_Ce=0.0_r8 it should be: ad_Cx=0.0_r8 |
|||
#4 | fixed | '#' is missing in tl_wrt_ini.F | ||
Description |
Line 395 in tl_wrt_ini.F. '#' is missing in front of 'endif' |
Query Language
query:
TracLinks and the [[TicketQuery]]
macro both use a mini “query language” for specifying query filters. Filters are separated by ampersands (&
). Each filter consists of the ticket field name, an operator and one or more values. More than one value are separated by a pipe (|
), meaning that the filter matches any of the values. To include a literal &
or |
in a value, escape the character with a backslash (\
).
The available operators are:
= | the field content exactly matches one of the values |
~= | the field content contains one or more of the values |
^= | the field content starts with one of the values |
$= | the field content ends with one of the values |
All of these operators can also be negated:
!= | the field content matches none of the values |
!~= | the field content does not contain any of the values |
!^= | the field content does not start with any of the values |
!$= | the field content does not end with any of the values |
The date fields created
and modified
can be constrained by using the =
operator and specifying a value containing two dates separated by two dots (..
). Either end of the date range can be left empty, meaning that the corresponding end of the range is open. The date parser understands a few natural date specifications like "3 weeks ago", "last month" and "now", as well as Bugzilla-style date specifications like "1d", "2w", "3m" or "4y" for 1 day, 2 weeks, 3 months and 4 years, respectively. Spaces in date specifications can be omitted to avoid having to quote the query string.
created=2007-01-01..2008-01-01 | query tickets created in 2007 |
created=lastmonth..thismonth | query tickets created during the previous month |
modified=1weekago.. | query tickets that have been modified in the last week |
modified=..30daysago | query tickets that have been inactive for the last 30 days |
See also: TracTickets, TracReports, TracGuide, TicketQuery