How to do nesting using ROMS?

Report or discuss software problems and other woes

Moderators: arango, robertson

Post Reply
Message
Author
leon
Posts: 78
Joined: Mon Mar 03, 2008 4:14 am

How to do nesting using ROMS?

#1 Unread post by leon »

Dear all,
Can ROMS do nesting right now? And how?
Are there any tutorials or tools or examples for ROMS nesting?

Any information is OK. Thank you very much~

andres
Posts: 54
Joined: Tue May 06, 2003 4:35 pm
Location: University of Concepcion
Contact:

Re: How to do nesting using ROMS?

#2 Unread post by andres »

It is possible to do in the ROMS_AGRIF version, at least.

Please get the code and manual at

http://roms.mpl.ird.fr/

Regards,

Andres
Andres Sepulveda

------------------------------
Geophysics Department
University of Concepcion

User avatar
kate
Posts: 4091
Joined: Wed Jul 02, 2003 5:29 pm
Location: CFOS/UAF, USA

Re: How to do nesting using ROMS?

#3 Unread post by kate »

Many of us have done off-line nesting, in which you compute the larger domain first, then extract boundary conditions from it for the smaller domain. What are your exact needs?

andres
Posts: 54
Joined: Tue May 06, 2003 4:35 pm
Location: University of Concepcion
Contact:

Re: How to do nesting using ROMS?

#4 Unread post by andres »

kate wrote:Many of us have done off-line nesting, in which you compute the larger domain first, then extract boundary conditions from it for the smaller domain. What are your exact needs?
Hi Kate,

What routines do you use to do that? They could be useful for already run scenarios...

Andres
Andres Sepulveda

------------------------------
Geophysics Department
University of Concepcion

mathieu

Re: How to do nesting using ROMS?

#5 Unread post by mathieu »

One possible set of matlab script for doing this is available from http://drobilica.irb.hr/~mathieu/Roms_Interpolation/
Two methods are available: interpolating using stations or using history files. The grids do not have to be parallel. I was the only user so far of those script so please ask me if some error occur. Note also that I do not consider there the thorny issues of which boundary conditions to select and other ROMS parameters.

drivas
Posts: 33
Joined: Tue Aug 28, 2007 8:31 pm
Location: CICESE

Re: How to do nesting using ROMS?

#6 Unread post by drivas »

I've wanted to do some nesting in my runs too. Offline nesting is not a problem, but I would like to do a nesting in which two different grids actually interact, is there any option to do this already?
Thanks,
DAVID

leon
Posts: 78
Joined: Mon Mar 03, 2008 4:14 am

Re: How to do nesting using ROMS?

#7 Unread post by leon »

Thanks all of you very much. Actually, RNT toolbox is also a useful tools for ROMS. You can get it from http://www.o3d.org/RNT/ . And there are also some tutorials on http://www.o3d.org/ROMS-Tutorial/ . Thanks a lot for Mr. E. Di Lorenzo. He really does a good job~

User avatar
kate
Posts: 4091
Joined: Wed Jul 02, 2003 5:29 pm
Location: CFOS/UAF, USA

Re: How to do nesting using ROMS?

#8 Unread post by kate »

drivas wrote:I've wanted to do some nesting in my runs too. Offline nesting is not a problem, but I would like to do a nesting in which two different grids actually interact, is there any option to do this already?
Thanks,
DAVID
See above for the French branch which does this. Also, the USGS guys have a Hudson River case which does this, though it isn't in the public Rutgers trunk. I expect it's coming... and has been for what, two years now?

Post Reply