Question about floats
-
- Posts: 5
- Joined: Thu Jan 04, 2024 3:34 am
- Location: East China Sea Bureau, Ministry of Natural Resourc
Question about floats
Hello everyone, I'm currently working with the float module, and after completing my calculations, I found that all values in my 'roms_flt.nc' file are NaN. Could anyone help me identify where the issue might be?
- Attachments
-
floats.in
- (10.78 KiB) Downloaded 115 times
-
roms_yellowsea.in
- (142.42 KiB) Downloaded 84 times
-
- roms_flt.nc
- (93.48 KiB) Downloaded 105 times
Re: Question about floats
Is your initial sea level (zeta) less than -0.1 at the start. If so, Fz0 = -0.1 could be out of physical range.
If sea level is OK, I suggest experimenting with release locations in grid units instead of lon/lat.
If sea level is OK, I suggest experimenting with release locations in grid units instead of lon/lat.
John Wilkin: DMCS Rutgers University
71 Dudley Rd, New Brunswick, NJ 08901-8521, USA. ph: 609-630-0559 jwilkin@rutgers.edu
71 Dudley Rd, New Brunswick, NJ 08901-8521, USA. ph: 609-630-0559 jwilkin@rutgers.edu
-
- Posts: 5
- Joined: Thu Jan 04, 2024 3:34 am
- Location: East China Sea Bureau, Ministry of Natural Resourc
Re: Question about floats
Thank you wilkin, i changed Fz0 and problem figured out.