Report or discuss software problems and other woes
Moderators: arango , robertson
Markberg
Posts: 5 Joined: Thu Jan 04, 2024 3:34 am
Location: East China Sea Bureau, Ministry of Natural Resourc
#1
Unread post
by Markberg » Sun Feb 04, 2024 7:25 am
Hello everyone
Everything is Ok, but i found ROMS failed to read minimum tidal current, ellipse minor axis
Code: Select all
GET_2DFLD - maximum tidal current, ellipse major axis
(Grid = 01, Min = 0.00000000E+00 Max = 1.92168231E+01)
GET_2DFLD - minimum tidal current, ellipse minor axis
(Grid = 01, Min = NaN Max = NaN)
I dont know why this happened. I checked the value of tidal current
tidal current value
It do has value.
But l really don't know why ROMS can't read it.
Attachments
yellowsea_forcing.nc
(11.32 MiB) Downloaded 120 times
Markberg
Posts: 5 Joined: Thu Jan 04, 2024 3:34 am
Location: East China Sea Bureau, Ministry of Natural Resourc
#2
Unread post
by Markberg » Sun Feb 04, 2024 8:19 am
Code: Select all
#define WET_DRY
#define SPLINES_VDIFF
#define SPLINES_VVISC
/*OPTIONS associated with momentum equations*/
#define UV_ADV
#define UV_COR
#define UV_VIS2
/*OPTIONS for horizontal mixing of momentum*/
#define MIX_S_UV
/*OPTIONS for horizontal mixing of tracers*/
#define MIX_GEO_TS
/*OPTIONS associated with tracers equations*/
#define TS_DIF2
#define SALINITY
#define NONLIN_EOS
#undef QCORRECTION
#undef SCORRECTION
/*Pressure gradient algorithm OPTIONS*/
#define DJ_GRADPS
/*Model configuration OPTIONS*/
#define MASKING
#define SOLVE3D
#define AVERAGES
#define CURVGRID
/*Sediment transport model OPTIONS*/
#undef SEDIMENT
#ifdef SEDIMENT
#undef ANA_SEDIMENT
#define SUSPLOAD
#define SED_MORPH
#undef BEDLOAD_MPM
#undef BEDLOAD_SOULSBY
#define ANA_SPFLUX
#define ANA_BPFLUX
#undef MIXED_BED
#endif
/*bottom boundary layer closure,define only one of the following*/
#undef UV_LOGDRAG
#define UV_QDRAG
#undef MB_BBL
#undef SG_BBL
/*OPTIONS for analytical fields configuration aka climate foring FOR TIDE*/
/*OPTIONS for analytical fields configuration aka climate foring FOR WIND FIELD HAVE*/
#define BULK_FLUXES
#define ANA_BTFLUX
#define ANA_BSFLUX
#define ATM_PRESS
#define EMINUSP
#define SOLAR_SOURCE
#define LONGWAVE_OUT
/*Vertical turbulent mixing*/
#define MY25_MIXING
#undef GLS_MIXING
#if defined MY25_MIXING
# define RI_SPLINES
# define KANTHA_CLAYSON
# define N2S2_HORAVG
# define CRAIG_BANNER
# define CHARNOK
#endif
/*TIDE*/
#define SSH_TIDES
#define UV_TIDES
#define ADD_FSOBC
#define ADD_M2OBC
/*Lateral boundary conditional*/
#define RADIATION_2D
/*OUTPUT*/
#define PERFECT_RESTART
#define RST_SINGLE
#define DIAGNOSTICS_UV
#define DIAGNOSTICS_TS
wilkin
Posts: 905 Joined: Mon Apr 28, 2003 5:44 pm
Location: Rutgers University
Contact:
#3
Unread post
by wilkin » Sun Feb 04, 2024 1:13 pm
It did read them. It's just telling you that somewhere in the file you have NaN values. They aren't on the boundary though otherwise ROMS would not have run.
John Wilkin: DMCS Rutgers University
71 Dudley Rd, New Brunswick, NJ 08901-8521, USA. ph: 609-630-0559
jwilkin@rutgers.edu