Roms blowup at 1cell bays

Sediment modeling collaborators: issues, applications, information exchange

Moderators: arango, robertson, rsignell

Post Reply
Message
Author
briskbamboo
Posts: 20
Joined: Thu Aug 20, 2020 1:24 pm
Location: University of Tsukuba

Roms blowup at 1cell bays

#1 Unread post by briskbamboo »

Dear
I compiled lake_jersey test case with all default setting in Forward folder then run it with my grid file. It run for nearly 100 steps then blowup, by checking rst.nc file I found up that at some isolated 1 cell bay at the boundary the temp go strange ( minus temp with blue color in the attached image). Should I mask all these cells from ocean to land or how to fix it?

Thanks
snapshot1.png
snapshot1.png (40.6 KiB) Viewed 4269 times
Image
Last edited by briskbamboo on Thu Aug 27, 2020 2:57 am, edited 1 time in total.

User avatar
arango
Site Admin
Posts: 1347
Joined: Wed Feb 26, 2003 4:41 pm
Location: DMCS, Rutgers University
Contact:

Re: Roms blowup at 1cell bays in Lake_jersey test case

#2 Unread post by arango »

The lake Jersey test case works for me. What you did is not LAKE_JERSEY :!: You changed the grid, land/sea mask, and added big and small islands. Stop calling it Lake Jersey because it is a different application and will confuse other users with misinformation! If doing nesting, it will require different nested grid connectivity because you changed its configuration. Obviously, you need to work on your land/sea mask. You need to avoid having a single cell bays! Who knows what you did to the bathymetry.

briskbamboo
Posts: 20
Joined: Thu Aug 20, 2020 1:24 pm
Location: University of Tsukuba

Re: Roms blowup at 1cell bays

#3 Unread post by briskbamboo »

Thank you arango for your comments.
I has changed the topic as remove the lake_jersey in the title.

Post Reply