Search found 54 matches
- Tue Apr 21, 2020 9:40 pm
- Forum: ROMS Discussion
- Topic: Artificially strong surface velocities (BODYFORCE?)
- Replies: 5
- Views: 3906
Re: Artificially strong surface velocities (BODYFORCE?)
I believe it's about time I post an update: After reexamining Warner et al 2005 (OM), it seemed like a good idea to reconsider the surface boundary condition for TKE (equation 51 in that paper). The file gls_corstep.F contains code to implement the surface BC for TKE; from my prior simulations, it s...
- Thu Mar 26, 2020 5:11 am
- Forum: ROMS Discussion
- Topic: Artificially strong surface velocities (BODYFORCE?)
- Replies: 5
- Views: 3906
Re: Artificially strong surface velocities (BODYFORCE?)
Hi John, Thanks for the advice. Now this is interesting: I was inspired by what you mentioned regarding my use of the k-epsilon closure; so I ran another quick simulation, this time using KPP instead. A comparison of vertical profiles of alongshore velocities and eddy viscosity at various cross-shor...
- Tue Mar 24, 2020 2:53 pm
- Forum: ROMS Discussion
- Topic: Artificially strong surface velocities (BODYFORCE?)
- Replies: 5
- Views: 3906
Re: Artificially strong surface velocities (BODYFORCE?)
Hi John,
1 for levbfrc.
1 for levbfrc.
- Tue Mar 24, 2020 12:56 am
- Forum: ROMS Discussion
- Topic: Artificially strong surface velocities (BODYFORCE?)
- Replies: 5
- Views: 3906
Artificially strong surface velocities (BODYFORCE?)
Dear all, My grid is a wedge-shaped f -plane domain with a constant bottom slope, initialized with uniform temperature and density fields, and zero u,v,w velocities everywhere. The only forcing is a constant alongshore surface momentum flux (via ana_smflux), using BODYFORCE to distribute it to all v...
- Sat Nov 16, 2019 8:08 am
- Forum: ROMS Discussion
- Topic: Laplacian Viscosity Damping Time
- Replies: 0
- Views: 1300
Laplacian Viscosity Damping Time
Dear all, This question is in regards to motivating the damping time of the Laplacian viscosity used in horizontal mixing. I know that we want to have that time scale be resolved by our model time step but large enough to resolve features of interest. For some context, my application is concerned wi...
- Thu Jul 11, 2019 7:18 pm
- Forum: ROMS Discussion
- Topic: Alongshore currents with periodic alongshore boundaries
- Replies: 9
- Views: 7738
Re: Alongshore currents with periodic alongshore boundaries
Hi All, Thank you very much for your insights. In response to John, Sasha, and Jamie: Essentially we are envisioning a 2D problem with negligible alongshore gradients, so we want any alongshore flows to be fully developed as they enter/exit the domain. We are also trying to keep our model as simple ...
- Sat Jun 29, 2019 6:20 am
- Forum: ROMS Discussion
- Topic: Alongshore currents with periodic alongshore boundaries
- Replies: 9
- Views: 7738
Re: Alongshore currents with periodic alongshore boundaries
Thank you for the reply, Alexander.
That makes sense, except where within ROMS am I supposed to supply my inflow density field?
Cheers,
-aryan
That makes sense, except where within ROMS am I supposed to supply my inflow density field?
Cheers,
-aryan
- Fri Jun 28, 2019 5:55 pm
- Forum: ROMS Discussion
- Topic: Alongshore currents with periodic alongshore boundaries
- Replies: 9
- Views: 7738
Re: Alongshore currents with periodic alongshore boundaries
Hi Kate,
Thanks for the quick reply.
Indeed, my next tactic is to make the surface stress a function of depth.
I'll report back on an successes/insight.
Cheers,
Thanks for the quick reply.
Indeed, my next tactic is to make the surface stress a function of depth.
I'll report back on an successes/insight.
Cheers,
- Fri Jun 28, 2019 5:42 pm
- Forum: ROMS Discussion
- Topic: Alongshore currents with periodic alongshore boundaries
- Replies: 9
- Views: 7738
Alongshore currents with periodic alongshore boundaries
Dear ROMS community, I've been searching for good way to do this for a while now, and the answer has thus far evaded me. I'm trying to implement an alongshore current, with periodic alongshore boundaries. The goal is to have the flow fully developed over the alongshore direction (my domain can be as...
- Fri Jun 28, 2019 5:31 pm
- Forum: ROMS Ecosystem
- Topic: advection in periodic domain
- Replies: 1
- Views: 7209
Re: advection in periodic domain
Hi Virivarola,
Can you explain how you prescribed an alongshore current with periodic boundaries? I'm trying to do something similar.
Thanks,
Can you explain how you prescribed an alongshore current with periodic boundaries? I'm trying to do something similar.
Thanks,
- Sat Feb 02, 2019 12:34 am
- Forum: ROMS Discussion
- Topic: Correct CPP options to use ANA_WWAVE?
- Replies: 4
- Views: 2880
Re: Correct CPP options to use ANA_WWAVE?
Thanks for the heads up Dr. Warner. I think I'm on the right track now. If it's any help to anyone, here's what I did: My CPP defs were modified to include ana_wave.h and all the necessary dependencies therein to specify wave height, length, top period (bottom period is for moveable bed i.e. sedimen...
- Tue Jan 29, 2019 4:49 am
- Forum: ROMS Discussion
- Topic: Correct CPP options to use ANA_WWAVE?
- Replies: 4
- Views: 2880
Re: Correct CPP options to use ANA_WWAVE?
Hi Nirnimesh, Thank you for your reply. I'm using ROMS, and I'm trying to figure out the least complex (in terms of model coupling) method of simulating the effects surface gravity waves in my simulations. ANA_WWAVE seemed promising, though I realize now I need to pay more attention to the bottom bl...
- Sun Jan 27, 2019 7:08 am
- Forum: ROMS Discussion
- Topic: Correct CPP options to use ANA_WWAVE?
- Replies: 4
- Views: 2880
Correct CPP options to use ANA_WWAVE?
Dear ROMS Community, I'm using ana_wwave.h to specify significant wave height, direction, and bottom period. However, I can't seem to figure out the correct CPP def's to activate; simply defining ANA_WWAVE fails at compilation, because the variables within ana_wwave.h of Hwave, Dwave, and Pwave_bot ...
- Sun Jul 29, 2018 6:24 am
- Forum: ROMS Discussion
- Topic: Analytical Surface Winds...no Bulk Flux
- Replies: 5
- Views: 2738
Re: Analytical Surface Winds...no Bulk Flux
Oh boy do I feel like a dummy; I see my error.
As usual, thank you very much for your help Kate!
Best,
-aryan
As usual, thank you very much for your help Kate!
Best,
-aryan
- Fri Jul 27, 2018 9:44 pm
- Forum: ROMS Discussion
- Topic: Analytical Surface Winds...no Bulk Flux
- Replies: 5
- Views: 2738
Re: Analytical Surface Winds...no Bulk Flux
Thank you for the quick reply, Kate.
Would using seawater density make a difference, since all I'm doing is
setting the value of Cd*V^2 to svstr?
Thanks,
-aryan
Would using seawater density make a difference, since all I'm doing is
setting the value of Cd*V^2 to svstr?
Thanks,
-aryan
- Fri Jul 27, 2018 9:11 pm
- Forum: ROMS Discussion
- Topic: Analytical Surface Winds...no Bulk Flux
- Replies: 5
- Views: 2738
Analytical Surface Winds...no Bulk Flux
Dear all, I'm trying to force my model with an analytical surface heat flux (which by itself works fine), and a surface V-wind component of 10 m/s. However, I don't want to use the bulk flux algorithm, as that would alter my surface heat flux forcing (right?). Therefore, I'm not defining ANA_WINDS. ...
- Thu May 03, 2018 9:42 pm
- Forum: ROMS Discussion
- Topic: Non-hydrostatic processes?
- Replies: 2
- Views: 2642
Re: Non-hydrostatic processes?
Dear Gustavo, Thank you very much; this paper is exactly what I needed. And just for the general community, here's an oldie but a goodie: Marshall, J., Hill, C., Perelman, L., & Adcroft, A. (1997). Hydrostatic, quasi‐hydrostatic, and nonhydrostatic ocean modeling. Journal of Geophysical Research...
- Tue May 01, 2018 11:07 pm
- Forum: ROMS Discussion
- Topic: Non-hydrostatic processes?
- Replies: 2
- Views: 2642
Non-hydrostatic processes?
Dear all, I know this is a broad question, and I apologize in advance for my ignorance, so I would be very grateful if you can just direct me to any appropriate reading material/literature. My question is: when confronted with a non-hydrostatic process, such as the front of a gravity current, plungi...
- Thu Dec 28, 2017 7:24 pm
- Forum: ROMS Discussion
- Topic: Analytical OBC Files?
- Replies: 2
- Views: 2502
Re: Analytical OBC Files?
Thanks for the guidance John. Yes, the BC values are being set to their initial values. We will be adding other forcing mechanisms, such as alongshore currents with tidal variability, and indeed we would like perturbations generated inside the model domain to leave offshore without influencing the i...
- Thu Dec 21, 2017 10:03 pm
- Forum: ROMS Discussion
- Topic: Analytical OBC Files?
- Replies: 2
- Views: 2502
Analytical OBC Files?
Dear All, Perhaps I'm overthinking this, but I'm having trouble understanding what the purpose of the ana_Xobc.h files are (i.e. ana_fsobc.h, ana_m2obc.h, ana_m3obc.h, and ana_tobc.h), and whether I'm using them correctly. In short, I'm running an idealized model forced only by analytical surface he...
- Fri Aug 25, 2017 12:10 pm
- Forum: ROMS Discussion
- Topic: How do you access GRID variables that aren't called in tile?
- Replies: 1
- Views: 1567
How do you access GRID variables that aren't called in tile?
Dear ROMS Community, I suppose this is more of a C-header file question, but: I'm computing the total water depth at any horizontal location as abs(z_w(i,j,N(ng))-z_w(i,j,0)) If, for example, I wanted to do this inside the body of ana_smflux.h, how would I import the z_w variable? I've trying locall...
- Wed May 31, 2017 4:09 am
- Forum: ROMS Discussion
- Topic: Is my very fine grid resolution leading to blow ups?
- Replies: 9
- Views: 5531
Re: Is my very fine grid resolution leading to blow ups?
Hi Kate, Thanks again for your assistance; you work wonders! I just wanted to share that the free surface no longer appreciably drops (first and last time step transects attached), and my volume is approximately conserved (first time step volume = 6.422130E+08; last time step volume, 28 days later, ...
- Tue May 30, 2017 4:40 am
- Forum: ROMS Discussion
- Topic: CFL condition
- Replies: 3
- Views: 7035
Re: CFL condition
From my understanding, the ROMS experts recommend a configuration such that your max Courant # is .8 to .85. You can check how ROMS computes these (3D and 2D) in Nonlinear/diag.F.
Best,
Best,
- Mon May 29, 2017 8:06 pm
- Forum: ROMS Discussion
- Topic: Is my very fine grid resolution leading to blow ups?
- Replies: 9
- Views: 5531
Re: Is my very fine grid resolution leading to blow ups?
Hi again, just a kind of philosophical question; In order to implement the Shc boundary condition, after looking at files like u2dbc_im.F and v2dbc_im.F, I either have to define SSH_TIDES or UV_TIDES, or have to have some exterior value; I'm not yet ready or comfortable (i.e. I have no justification...
- Sun May 28, 2017 9:36 pm
- Forum: ROMS Discussion
- Topic: Is my very fine grid resolution leading to blow ups?
- Replies: 9
- Views: 5531
Re: Is my very fine grid resolution leading to blow ups?
Thanks for the suggestion.
I'll try these different BC's and share any successes/failures.
I'll try these different BC's and share any successes/failures.
- Sun May 28, 2017 8:23 pm
- Forum: ROMS Discussion
- Topic: Is my very fine grid resolution leading to blow ups?
- Replies: 9
- Views: 5531
Re: Is my very fine grid resolution leading to blow ups?
Thanks for the heads up. After looking at the log file, the volume is indeed decreasing; it starts at 642,213,000 m3 and ends at approximately 615,710,000 m3 before the blow up. This makes me curious then: am I loosing water because my (offshore) boundary condition is set to radiation, and I periodi...
- Sat May 27, 2017 7:11 am
- Forum: ROMS Discussion
- Topic: Is my very fine grid resolution leading to blow ups?
- Replies: 9
- Views: 5531
Re: Is my very fine grid resolution leading to blow ups?
Thanks Kate, good to know about the test problem. As far as I can tell, the u, v, w velocities, as well as temperature field, are not behaving abnormally. The only striking thing I can say for now is that somewhere down the line, the depth in the nearshore-most cells become inverted (pictures of the...
- Fri May 26, 2017 10:50 pm
- Forum: ROMS Discussion
- Topic: Is my very fine grid resolution leading to blow ups?
- Replies: 9
- Views: 5531
Is my very fine grid resolution leading to blow ups?
Dear ROMS community, Can ROMS handle a grid resolution (rho points) where dx = dy = 10 m, but dz is as small as 0.14 m in the very nearshore-most cells (30 vertical levels)? A transect image of the first ~100 m of my grid (an idealized 3D wedge shape, with a bottom slope of 0.05, and everything alon...
- Tue May 24, 2016 9:36 am
- Forum: ROMS Discussion
- Topic: Horizontal Mixing & spatially varying metric factors m and n
- Replies: 2
- Views: 3085
Re: Horizontal Mixing & spatially varying metric factors m a
Thank you very much Kate.
That helps!
That helps!
- Mon May 23, 2016 7:48 am
- Forum: ROMS Discussion
- Topic: Horizontal Mixing & spatially varying metric factors m and n
- Replies: 2
- Views: 3085
Horizontal Mixing & spatially varying metric factors m and n
Dear ROMS Friends, In setting values for the harmonic and biharmonic horizontal diffusion and viscosity coefficients (TNU2, VISC2, etc), I'm taking guidance from the following page (the one Kate refers people to) : https://www.myroms.org/wiki/Horizontal_Mixing I have a couple questions based on the ...
- Thu Oct 22, 2015 1:22 am
- Forum: ROMS Problems
- Topic: Blow up with LMD_MIXING and GLS_MIXING but BVF_MIXING works
- Replies: 8
- Views: 7592
Re: Blow up with LMD_MIXING and GLS_MIXING but BVF_MIXING wo
Alright, so the simulation ran to completion after adding #define WET_DRY to the CPP defs.
Thank you both very much for your help.
Thank you both very much for your help.
- Mon Oct 19, 2015 7:45 pm
- Forum: ROMS Problems
- Topic: Blow up with LMD_MIXING and GLS_MIXING but BVF_MIXING works
- Replies: 8
- Views: 7592
Re: Blow up with LMD_MIXING and GLS_MIXING but BVF_MIXING wo
Quick update: with the WET_DRY CPP option defined, and a minimum depth of 10 m (which I could probably reduce), the GLS simulation has lasted longer than ever: 8 days 20 hours and counting! Thank you both for your assistance. When this is all said and done, I'm still very curious as to why the BVF m...
- Sun Oct 18, 2015 8:42 pm
- Forum: ROMS Problems
- Topic: Blow up with LMD_MIXING and GLS_MIXING but BVF_MIXING works
- Replies: 8
- Views: 7592
Re: Blow up with LMD_MIXING and GLS_MIXING but BVF_MIXING wo
Thank you both for your quick replies. "#define WET_DRY" ---> wow, silly me, I could have sworn I already activated this. Thank you so much for pointing that out! I'm investigating GLS parameters that will hopefully bring the model to stability; I'll post when I find a set that works. With...
- Fri Oct 16, 2015 7:46 pm
- Forum: ROMS Problems
- Topic: Blow up with LMD_MIXING and GLS_MIXING but BVF_MIXING works
- Replies: 8
- Views: 7592
Re: Blow up with LMD_MIXING and GLS_MIXING but BVF_MIXING wo
Hi again, I've included an image of the surface temperature and the mid-depth salinity from the restart file of another similar run. Nearshore (the left side) is full of NaNs. I've also included a transect of the temperature field through time. Just before the blow up, the nearshore region cools at ...
- Tue Aug 25, 2015 11:54 pm
- Forum: ROMS Problems
- Topic: Blow up with LMD_MIXING and GLS_MIXING but BVF_MIXING works
- Replies: 8
- Views: 7592
Blow up with LMD_MIXING and GLS_MIXING but BVF_MIXING works
Dear ROMS Community, I'm running an idealized simulation of an along-shore uniform, wedge-shaped (simple linear sloped bottom) coastal region, to hopefully observe a thermally-induced exchange flow. I'm aiming for a 4 week simulation time, with a time step of 5 seconds. My primary forcing is an anal...
- Wed Jul 29, 2015 7:34 pm
- Forum: ROMS Discussion
- Topic: Is ana_btflux an alternative to ROMS bottom heat trapping?
- Replies: 2
- Views: 2342
Re: Is ana_btflux an alternative to ROMS bottom heat trappin
Thank you Kate.
Yes, I'm also exploring/manipulating the exponential decay of solar radiation with depth. So many interesting options!
Best,
-aryan
Yes, I'm also exploring/manipulating the exponential decay of solar radiation with depth. So many interesting options!
Best,
-aryan
- Wed Jul 29, 2015 5:26 pm
- Forum: ROMS Discussion
- Topic: Is ana_btflux an alternative to ROMS bottom heat trapping?
- Replies: 2
- Views: 2342
Is ana_btflux an alternative to ROMS bottom heat trapping?
Dear all, If I understand correctly, the default setup for ROMS traps all heat flux arriving at the bottom cells in those cells. Would defining a bottom flux in ana_btflux make the model behave differently? For example, if I wanted 50 degC m/s to pass through those bottom cells, is that what I would...
- Fri May 15, 2015 10:14 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
An update: This time I tried running the oceanG executable with lldb instead of gdb. The last few lines of the output are: NL ROMS/TOMS: started time-stepping: (Grid: 01 TimeSteps: 00000001 - 00001440) STEP Day HH:MM:SS KINETIC_ENRG POTEN_ENRG TOTAL_ENRG NET_VOLUME C => (i,j,k) Cu Cv Cw Max Speed 0 ...
- Wed May 13, 2015 8:55 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
No, the directory and .f90 files are still there. The build folder gets replaced everytime I run a new build though.
- Wed May 13, 2015 7:49 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
The compilers listed in build.bash are ifort, pgi, and gfortran. I don't know if this helps, but I also have gcc and g++ installed: Aryan-Safaies-MacBook-Pro:Upwelling aryansafaie$ which gcc /opt/local/bin/gcc Aryan-Safaies-MacBook-Pro:Upwelling aryansafaie$ which gcc43 /opt/local/bin/gcc43 Aryan-Sa...
- Wed May 13, 2015 7:36 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
I'm using gfortran.
Should I try using any of the others in build.bash?
Should I try using any of the others in build.bash?
- Wed May 13, 2015 7:27 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
What I'm guessing is that the problem is either:
-I have a hardware issue
-I need to use NetCDF 4 instead of 3
-Somewhere along the way, using MacPorts went wrong.
But that still doesn't explain why gdb won't give me line numbers.
-I have a hardware issue
-I need to use NetCDF 4 instead of 3
-Somewhere along the way, using MacPorts went wrong.
But that still doesn't explain why gdb won't give me line numbers.
- Wed May 13, 2015 7:16 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
Running a backtrace or where gives me question marks: 0x0000000100e2799c in ?? () (gdb) bt #0 0x0000000100e2799c in ?? () #1 0x000000005fbf8920 in ?? () #2 0x00007fff00000000 in ?? () #3 0x0000000100000001 in ?? () #4 0x0000000000000000 in ?? () (gdb) where #0 0x0000000100e2799c in ?? () #1 0x000000...
- Wed May 13, 2015 6:37 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
Hi Kate I've been running it with the following limits: core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited file size (blocks, -f) unlimited max locked memory (kbytes, -l) unlimited max memory size (kbytes, -m) unlimited open files (-n) 256 pipe size (512 bytes, -p) 1 stack size (kbyt...
- Wed May 13, 2015 5:15 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
Hi Kate, I was being foolish in hitting escape...I saw it on another forum post, and thought it might lead me to a clue as to what's going on in my situation. So never mind that. Now in ocean_upwelling.h I've tried setting NHIS, NAVG, and NDIA each form 72 (their defaults) to something large like 20...
- Mon Mar 09, 2015 6:30 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
Hello again Kate, You were exactly right; the NetCDF directory on the HPC was in a directory I wasn't able to access yet, so I changed some things around and resolved that issue. Apologies for the side-issue; perhaps I should have posted that in another thread. Getting back to the main issue at hand...
- Tue Feb 10, 2015 8:56 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
Hi again, This time I'm trying to run ROMS on my university's HPC cluster; It compiled, and I have an oceanS executable. Now when I run it with ocean_upwelling.in, I get the following error: (I've copied and pasted the relevant part of the output): STEP Day HH:MM:SS KINETIC_ENRG POTEN_ENRG TOTAL_ENR...
- Wed Jan 28, 2015 11:05 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
Hi Kate, I was worried it would come to this; I have a feeling I did something iffy earlier on (in terms of preparing netcdf and fortran), and I remember some of the other forums making mention of different compilers giving different segfault errors. I'll dig around some more and hopefully make a bi...
- Wed Jan 28, 2015 10:05 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
cd /Users/aryansafaie/ROMS/Projects/Upwelling/Build; /opt/local/bin/gfortran -c -frepack-arrays -mcmodel=medium -g -fbounds-check master.f90 /opt/local/bin/gfortran -frepack-arrays -mcmodel=medium -g -fbounds-check /Users/aryansafaie/ROMS/Projects/Upwelling/Build/esmf_roms.o /Users/aryansafaie/ROMS...
- Wed Jan 28, 2015 9:33 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
Doing that results in: 0x0000000100fd299c in ?? () (gdb) where #0 0x0000000100fd299c in ?? () #1 0x000000005fbfa200 in ?? () #2 0x00007fff00000000 in ?? () #3 0x0000000000000001 in ?? () #4 0x0000000000000000 in ?? () I don't understand why I'm getting the ??; perhaps it's an issue with my directori...
- Wed Jan 28, 2015 8:25 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
Hi again, Using the where command gives me the following: #0 0x000000010047399c in ?? () #1 0x000000005fbfca90 in ?? () #2 0x00007fff00000001 in ?? () #3 0x0000000000000001 in ?? () #4 0x00007fff5fbfcbbf in ?? () #5 0x0000000000000000 in ?? () I also tried lowering Lm to 10, but it made no differenc...
- Tue Jan 27, 2015 10:39 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
Hi Kate, Thanks again for being so speedy! Pardon my novice ineptitude running gdb. Ok, this time, after running it properly, I received the following (I'm pasting the last few lines from the terminal) STEP Day HH:MM:SS KINETIC_ENRG POTEN_ENRG TOTAL_ENRG NET_VOLUME C => (i,j,k) Cu Cv Cw Max Speed 0 ...
- Tue Jan 27, 2015 9:58 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Re: Segmentation Fault Upwelling Example
Hi Kate, Thanks for getting back to me. My stack size is 65532 KB; when I enter the following in the terminal: gdb ./oceanS < ocean_upwelling.in the terminal prints out many (worrisome) messages. I've attached them as a txt file if that helps. However, there doesn't seem to be any mention of a segfa...
- Wed Jan 21, 2015 8:52 pm
- Forum: ROMS Problems
- Topic: Segmentation Fault Upwelling Example
- Replies: 30
- Views: 17959
Segmentation Fault Upwelling Example
Dear ROMS community, I recently installed and compiled ROMS on my Mac (64-bit Yosemite, GNU 3.8.1); I followed (mostly) the tutorial here: https://www.myroms.org/wiki/index.php/ROMS_Mac After compiling ROMS with ./build.bash and getting an oceanS file in my Projects/Upwelling directory, I entered ./...